1, operation

(1) press the start button, scraping and sucking mud machine began to run, press two times, the mud scraper stop running.

(2) if you need to run in the opposite direction, just press the reverse button, you can achieve the reverse walk.

2, matters needing attention

Equipment at run time, should check whether the operation of the motor is normal, the temperature is overheated, and there is no abnormal sound. For the reducer, to pay attention to whether there is leakage or leakage phenomenon, through the vent is open. Also, the cable is stuck.

3, troubleshooting

(1) if the motor has a noise, it should be stopped immediately.

(2) if there is abnormal sound at the bottom of the pool, the water in the pool should be dried and then checked.

(3) if the cable is stuck, it should be shut down for repair.